Pilot Setpoint Regulators for Equilibar Back Pressure Regulators

Pilot Regulators & Setpoint Kits

Supply dome pressure to Equilibar back pressure regulators

What is a Pilot Regulator or Setpoint Kit?

Equilibar back pressure regulators are dome loaded which means they require a 1:1 fluid setpoint pressure on the dome to match the desired inlet pressure. This setpoint pressure, also called “pilot pressure” is controlled using a pressure reducing regulator or electronic pressure controller sold separately. These pressure regulators are referred to as “pilot regulators” or “setpoint kits” on our website.

There are many advantages to using our dome loaded design. Some advantages include:

  • extremely wide range of Cv with a single unit,
  • frictionless operation with no cracking pressure, and
  • no hysteresis as found in traditional spring loaded regulators.

For more information, see how our back pressure regulators work.

How to Choose a Pilot Regulator Setpoint Kit

Most customers use compressed air or bottled nitrogen to supply the fluid setpoint signal for their Equilibar back pressure regulator. The setpoint pressure can be controlled using a manual setpoint regulator (standard pressure reducing regulator) or an electronic pressure controller. The choice of pilot regulator boils down to how the Equilibar back pressure will be used. If the system will be running at the same setpoint over a long period of time, with infrequent changes, then a manual pilot regulator may be a good choice. If the application requires computer automation, then an electronic pilot regulator will be the right choice.

Discuss the options with an Equilibar applications engineer when you place your order.

Below you will find some pilot regulators (setpoint kit) options for either manual or electronic control.

Manual Setpoint Pilot regulator Options :

LPR2 Ultra Low Pressure Regulator LPR2 Ultra Low Pressure Regulator 1/4" Ranges from 0.25 - 7  to 1 - 28 in H2O 6.35 - 177 to 25 - 711 mm H2O
Model 10 Pressure Reducing Regulator 1/4" Ranges from 0 - 2 to 5 - 400 psig 0 - 0.1 to 0.3 - 27.5 bar(g)
Equilibar low pressure regulator Series 41 High Flow Low Pressure Regulator 3/8", 1/2", or 3/4" Ranges from 0 - 0.7 to 5 psig 0 - 0.04 to 0.3 bar(g)
Series-3000-High-Pressure-Regulator Series 3000 High Pressure Regulator 1/4" Ranges from 0 - 250 to 10,000 psig 0 - 17.2 to 690 bar(g)

Electronic Setpoint Pilot regulator Options:

Photo of Equilibar QPV Electronic Pressure RegulatorQPV Electronic Pressure RegulatorVacuum – 150 psig / 10.3 bar(g) 0-10 V or 4-20 mA Other Inputs Available
image of QBS electronic pressure regulator QBS Electronic Pressure RegulatorVacuum – 500 psig / 34.5 bar(g) 0-10 V or 4-20 mA Other Inputs Available
photo of Equilibar GP Series Electronic Pressure RegulatorGP Electronic Pressure RegulatorVacuum – 1000 psig / 69 bar(g) 0-10 V or 4-20 mA Other Inputs Available
The EPR-3000 controls pressure precisely in the high pressure range of 0-3000 psigEPR Series Electronic Pressure Regulators Vacuum - 3000 psig / 206 bar(g) 0-10 V or 4-20 mA Other Inputs Available
Equilibar News
graphic with three valves for industrial applications

Equilibar Introduces New IC Series of Valves for High Flow Industrial Applications

On October 1, Equilibar launched the IC Series, a new Industrial Collection of valves for back pressure, vacuum, and flow control applications with high throughput. Featuring our dome-loaded multiple-orifice technology, these valves and regulators provide best-in-class performance in a practical, compact size.  They are easily customized for a variety of applications and are well suited Read More

Read More